Mechanism of the thermal decomposition of nitrates from graphite furnace mass spectrometry studies

A basically new mechanism of the thermal decomposition of solids is proposed to explain the mass spectral observations of gaseous molecules of CoO, CuO, Cu₂O, NiO, PbO and Mg(OH)₂ during the low-temperature decomposition of the anhydrous and hydrated nitrates of these metals. The mechanism consists of two stages: congruent gasification of all reaction products irrespective of their saturated vapor pressure and subsequent condensation of the low-volatility species (oxides and hydroxides). The partial pressures of these species at the appearance temperatures calculated from this theory for the first stage of the process (1–50 mPa) are in agreement with the detection limits of the quadrupole mass spectrometers used in these experiments. The proposed mechanism is supported by other available data obtained by thermal analysis.     

Chemical imaging in biology and medicine using ion microscopy

The ability to quantitatively map the distribution of elements on the micrometer scale and smaller with high sensitivity and isotopic discrimination is unique to ion microscopy. The information contained in ion images can be crucial to the study of the solid state, where chemical heterogeneity is often directly related to observed behavior. The tools of digital image processing allow the extraction of quantitative information from the image data. These techniques coupled with improved instrumentation for the detection of ion images drastically increase the problem solving capabilities of the ion microscope. The use of such methods and instrumentation in the ion microscopic analyses of cell cultures and tissues of biological and biomedical relevance will be discussed.     

沉积物中壬基苯酚类雌性激素化合物的加速溶剂提取方法研究

为了同时提取和检测沉积物中的雌性激素化合物对壬基苯酚(NP)、对壬基苯酚一乙氧醚(NP1EO)和对壬基苯酚二乙氧醚(NP2EO),对加速溶剂提取体系的各种条件和对壬基苯酚类化合物的硅烷基化反应条件等进行了优化。在丙酮和丙酮-二氯甲烷混合液(丙酮含量≥60%)介质中,这些化合物的硅烷基化反应很快达到反应终点。加速溶剂提取体系的最佳提取条件是120℃、8.4MPa、两次循环提取;最佳提取溶剂是二氯甲烷。与索氏提取和酸化悬浮液液提取比较,明显提高了提取率、重现性和准确性。平均添标回收率在89.3%~95.7%之间,相对标准偏差为2.3%~13.4%。本方法对壬基苯酚、对壬基苯酚一乙氧醚和对壬基苯酚二乙氧醚化合物的检出限分别为10、30、35ng/gdw(干重)。     

Radio-Frequency Hexamethyldisiloxane Plasma Deposition: A Comparison of Plasma- and Deposit-Chemistry

This study reports on the effect of input power to hexamethyldisiloxane (HMDSO) plasmas. The power dependence of the plasma-phase species and of the surface chemistry (of the deposits) has been investigated. Neutral and positive molecular species were detected within the plasma using mass spectrometry (MS). Secondary ion mass spectrometry (SIMS) was used to probe the molecular structure of the deposits. The elemental composition of the surface was determined by XPS and the deposition rate was monitored using a vibrating quartz crystal microbalance. Neutral and cationic molecules of mass greater than HMDSO were detected in the plasma. Their formation through ion-molecule reactions is proposed. Changes in the relative concentration of plasma-phase species follow those seen in molecular species detected at the deposit surface. Thus, we believe that the molecular structure of the deposits can be related to the species present in the plasma. While traditionally the dominant mechanism in deposit formation is assumed to be free radical combinations, we propose other possibilities involving cations with the aim of putting forward a new perspective on plasma polymerization mechanisms and thereby stimulating discussion.     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

Pyrolysis chemical ionization mass spectrometry of cellulose ethers

Pyrolysis ammonia chemical ionization (PyCI) mass spectrometry was performed on hy-droxyethyl-, hydroxypropyl-,methyl-, hydroxypropylmethyl-, and ethylhydroxyethyl cel-luloses. The mass peaks in the PyCI mass spectra of these cellulose ethers could be assigned to the ions of pyrolytic dissociation products which form via the [2 + 2 + 2] cycloreversion and the E_i elimination pyrolysis pathway. Structural information about the residual amount of nonderivatized cellulose, the relative chain length distributions of the substituents in hydroxyalkyl celluloses, and the end-capping of hydroxyalkyl substituents by alkyl groups in the mixed cellulose ethers is obtained. Interference of secondary pyrolysis products in the PyCI mass spectra is found to be of minor importance, especially in the lower mass regions. © 1995 John Wiley & Sons, Inc.     

Depth profiling of latex blends of fluorinated and fluorine‐free acrylates with laser‐induced secondary mass spectrometry

We explored phase separation and self‐assembly of perfluoroalkyl segments at the surface of polymer films obtained from latices of semifluorinated acrylate copolymers and the corresponding latex blends of nonfluorinated and semifluorinated polyacrylates. With laser‐induced secondary mass spectrometry the fluorine distribution was measured after annealing above the minimum film‐forming temperature of the polymers up to a depth of several micrometers. Depth profiles of a semifluorinated acrylate homopolymer and latex blends thereof with fluorine‐free alkylacrylates with 25, 50, and 75 mol % semifluorinated acrylate as well as a copolymer comprised of alkyl acrylate and semifluorinated acrylate (50/50 mol %) were investigated. In the case of latex blends containing both semifluorinated polyacrylates and fluorine‐free or low‐fluorine polymers, self‐assembly accounted for enrichment of the perfluoroalkyl segments at the surface. Coatings exhibiting low surface energy and having a substantially reduced total fluorine content were obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 360–367, 2003     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.     

X射线荧光光谱法快速测定稀土萃取生产的中控样品

本文介绍了一种新型样品杯，通过使用这种样品杯，实现了大型Ｘ射线荧光光谱仪在稀土萃取生产过程中的现场分析，同时还对基体效应，谱线干扰，背景扣除等进行了研究。实践证明本法准确可靠，简便快速。